Products Details

BEAM200 Intelligent Addressable Beam Detector


From the smallest business to the largest facility or campus, small conventional panels feature large capacity power supplies and easy front panel programming while large intelligent systems lead the market in sophisticated features including distributed emergency audio and are remarkably easy to configure and program. In addition to systems, Secutron™ also offers the most complete line of advanced detection industry with the advanced system features required by emerging fire codes and new protection design practices. Large intelligent networked systems support fully redundant network modularity, graphic display annunciation/monitoring, building management system integration, programmable smoke control and multi-channel emergency communications across buildings, campuses or communities. Secutron™ systems are also supported with the largest selection of detectors, signaling devices and accessory devices, including intelligent power supplies.

• 16 to 328 foot protection range
• Single-ended, reflective design
• Easiest alignment in the industry with digital display
• 6 field selectable sensitivity levels
• Optional integral NFPA 72 sensitivity test feature
• Removable plug-in terminal blocks
• Built-in automatic gain control compensates for signal deterioration from dust build-up
• Remote test station available
• Paintable cover
• Optional heater kits available


Operational Specifications
Protection Range 16 ft to 328 ft (5 m to 100 m)
Adjustment Angle ±10 Degrees horizontal & vertical
(The optics move independent of the unit)
Sensitivity Levels
Level 1 – 25%
Level 2 – 30%
Level 3 – 40%
Level 4 – 50%
Acclimate™ Level 1 – 30 to 50%
Acclimate Level 2 – 40 to 50%
Fault Condition (Trouble)
96% or more obscuration blockage
In alignment mode Improper initial alignment
Self-compensation limit reached
Alignment Aid
Optical gunsight
Integral signal strength indication 2 digit display
Alarm Indicator Local red LED and remote alarm
Trouble Indicator Local yellow LED and remote trouble
Normal Indicator Local flashing green LED
Test/Reset Features
Integral Sensitivity Test Filter (BEAM200S only, requires additional external power supply)
Sensitivity filter (Incremental scale on reflector)
Local test switch Local reset switch
Remote test and reset switch (Compatible with RTS151 and RTS151KEY test station)
Smoke Detector Spacing
On smooth ceilings, 30 to 60 feet between projected beams and not more than one- half that spacing between a projected beam and a sidewall. Other spacing may be used depending on ceiling height, airflow characteristics, and response requirements. See NFPA 72 and CAN/ULC S524.
Environmental Specifications
Temperature –22°F to 131°F (–30°C to 55°C)
Humidity 10 to 93% RH Noncondensing
Electrical Specifications
Voltage 15 to 32 VDC
Avg. Standby Current (24VDC) 2 mA Max
Avg. Current During Testing 500 mA Max
Alarm Current (24VDC) 8.5 mA Max
Fault Current (24VDC) 4.5 mA Max
Alignment Mode Current (24VDC) 20 mA Max
Mechanical Specifications
Detector Dimensions 10 in H × 7.5 in W × 3.3 in D (254 mm H × 191 mm W × 84 mm D)
Reflector Dimensions (16′ to 230′) 7.9 in × 9.1 in (200 mm × 230 mm)
Reflector Dimensions (beyond 230′) 15.7in×18.1in(400mm×460mm)
Electrical Specifications (BEAMHK)
Voltage 15 to 32 V
Current 92 mA at 32 V
Power Consumption 1.6 W at 24 V; 3 W at 32 V