“The Ranger™”, featuring “Smart Nozzle” Technology, was designed for today’s Industrial fire fighting and protection needs. Hazards involving flammable liquids in storage and liquids under pressure have met their match with the New Millennium
Ranger3™ GUN TRAILERS:
Description:
“The Ranger™”, featuring “Smart Nozzle” Technology, was designed for today’s Industrial fire fighting and protection needs. Hazards involving flammable liquids in storage and liquids under pressure have met their match with the New Millennium Equipment from Williams Fire & Hazard Control, Inc®.
The “Ranger™” monitor/nozzle combination is capable of not only self-educing foam concentrate, but can do so while maintaining a nearly constant pressure (+/- 10%) and a constant foam percentage (1% or 3% selectable) regardless of the flow rate. Discharge flow rates from 1000-3000 USGPM (3800-11356 LPM) can be water only, Hydro-Foam™ (using jet pumps or automatic constant/selectable metering) or Hydro-Chem™ for extinguishing liquids and gases under pressure. All this and the operator is still afforded the freedom of smooth, rapid horizontal and vertical movement that only the “Ranger™” can provide, raising this monitor/nozzle “above” all others.
This “Hybrid” nozzle has the unique capability to perform as an automatic pressure or fixed gallonage nozzle. During automatic operation the nozzle will respond to varying flows to maintain a nearly constant tip pressure, thus maximizing effective range for a given discharge flow. Once the nozzle reaches the fixed gallonage set point (1000-3000 GPM), it performs as a conventional fixed gallonage nozzle. This is desirable for foam proportioning operations on storage tank fires or other hazards requiring specific application rates. This nozzle is capable of Hydro-Foam™ proportioning at rates up to 3000 GPM @ 3%. It can automatically maintain a nearly constant foam percentage (1% or 3%) throughout the entire flow range while self-educing. It can optionally be configured to proportion foam from remote locations using jet pump technology (thus forfeiting the constant/selectable metering feature). The extensive “Ranger™” options list allows this nozzle to be Hydro-Chem™ capable (without Hydro-Foam™ capability) with “PKW™” flow rates from 25 lbs/s to 50 lbs/s. The single 6” full flow stainless steel waterway construction provides minimum friction loss, maximum efficiency, and years of trouble-free service. The standard tiller-bar control provides full monitor articulation of 360˚ rotation and down to
-15˚ and up to +75˚ vertical travel. Pattern control from straight stream to full fog is accomplished via a full wrap-around handle attached to the outer sleeve.
Standard Features List:
Dual Mode Automatic/Fixed Operation
Fixed Gallonage plugs: 1K, 2K, 3K
Hydro-Foam™ Constant/Selectable - 1% or 3% Nozzle
Efficient Single 6” SS Monitor
Tiller-bar control
Wrap-around handle design for pattern control
Tandem axle trailer
Integral 8” carbon steel manifold
Three 5” non-clappered storz inlets w/caps
2.0” ball fixed height hydraulic surge coupler
Anti-skid grip surface
Four point trailer jacks plus tongue jack
Standard grade Red Finish
Options:
Hydro-Chem™ Tip conversion
Choke tubes (25 or 50 lbs/s)
Dry chemical manifolds (4 inlet or 7 inlet)
1.5JP30 Jet Pump w/stinger (one)
2.0JP60 Jet Pump w/stinger (one)
3-2.5” FNST x 3.0” MNPSH Siamese - (Jet to Monitor Supply)
1-2.5’” FNST x 3-1.5” MNST Wye - (Jet Pump Supply)
8” SS integral manifold w/3-5” Storz inlets
8” SS integral manifold w/2-6” Storz inlets
Internal 5” or 6”clappers
European adjustable tow bar
European lighting package
Gear operated monitor controls - (vertical & horizontal)
Radio remote controlled electric/hydraulic/gear - monitor controls
Premium (show grade) paint & finish
2.5” x 10’’ Dry Chemical Hose
