Products Details

Hoses are 100% polyester, double jacket. Hoses with a service test pressure rating of 300 PSI (2100 KPa). Compared to traditional rubber LDH; the hose is lighter in weight, more compact, flexible to ‐60°F (‐51°C), more Abrasion and puncture resistant, and can be loaded without hanging to dry. The hose is also used as a suction hose in shorter lengths. The ENCAP™ treated outer jacket improves durability, reduces water absorb on up to 40%, enhances chemical resistance and adds color options. Construction: Circular woven, double jacket 100% virgin spun polyester. Tube: Extruded T.P.U. elastomer ‐ Ozone and age resistant. Standard Lengths: 50' and 100' (15.2 and 30.5 m) Colors available: Clear (white), green, red, orange, blue, purple, tan, and yellow.

· The hose is of double jacket construction with 100% virgin spun polyester yarn in both jackets.

· For the 4" (102 mm) hose, there shall be a minimum of 13.0 filler yarns per inch in the inner jacket and 10.5 filler yarns per inch in the outer jacket. For the 5" (127 mm) hose, there shall be a minimum of 14.0 filler yarns per inch in the inner jacket and 10.0 filler yarns per inch in the outer jacket.

· The thickness of the lining shall be 0.020" (508 μm) minimum and it shall be constructed of extruded T.P.U. elastomer.

· The outside jacket shall be treated with ENCAPTM elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.

· The hose service temperature range shall be ‐60°F to 150°F (‐51°C to 66°C).

· FM abrasion test of 50,000 cycles minimum and Taber abrasion test of 15,000 cycles minimum.

· At 600 PSI (4200 KPa), its elongation shall not exceed 10% of the initial hose length, it shall not warp more than 12 inches (31 cm) and should not rise from the test table.

· The hose shall not twist more than 1 1/2 turn per 100 (30.5 m) while at 600 PSI (4200 KPa).

· Minimum service test pressure of 300 PSI (2100 KPa).

· Minimum proof test pressure of 600 PSI (4200 KPa).

· Minimum straight burst test pressure of 900 PSI (6300 KPa).

· The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSI (6300 KPa).

· Meets or exceeds ULC‐19 and NFPA 1961.

TablePerformance

Hose Size	Minimum Kink Burst Test Pressure	Service Test Pressure	Proof Pressure	Burst Pressure
4" (102 mm)	300 PSI (2100 KPa)	300 PSI (2100 KPa)	600 PSI (4200 KPa)	900 PSI (6300 KPa)
5" (127 mm)	300 PSI (2100 KPa)	300 PSI (2100 KPa)	600 PSI (4200 KPa)	900 PSI (6300 KPa)