Products Details

Typhoon AFFF 3%

Applications:

TYPHOON 3% - AFFF is used at 3% concentration and applied with all standard low expansion foam equipment and fixed foam installations especially for class B fires. The non-aspirated solution of TYPHOON 3% - AFFF can be applied using water monitors, water sprinklers or deluge systems. Seawater, brackish water and treated industrial water do not affect the outstanding fire performance. TYPHOON 3% - AFFF is used in petrochemical industries, on airports and in on- and offshore areas. It is also used in plastics and recycling industries and generally, where large fire loads have to be extinguished safely and within the shortest time possible. When used near electrical installations observe DIN/VDE-0132, or equivalent national standards.

Download Files

Description:

TYPHOON 3%- AFFF is a synthetic, aqueous film forming fire extinguishing foam concentrate, based on surface active agents. Special surfactants, fluorinated components and freeze protection characterize the composition of this outstanding product. Using only the latest C6 technology, the fluorinated components contained in TYPHOON 3%- AFFF are in full compliance with Directive EU 757/2010.

Properties:

TYPHOON 3%- AFFF forms foam very readily and is used for both low and medium expansion foam applications. The film forming and re-ignition preventing ingredients of TYPHOON 3% - AFFF provide for extremely fast and effective extinction especially when used on class B fires. The aqueous film formed out of the draining foam solution spreads extremely fast and enhances the flowing properties and burn-back resistance of the foam. The extinction time is reduced considerably and the fire source cooled. The aqueous film even extinguishes areas scarcely covered with foam and prevents re-igniting of areas, where the foam layer is ruptured. The foam is stable and in combination with the aqueous film, it forms a lasting, gastight layer on flammable areas. Due to its high foam density a long throwing range can be achieved. The foam is oleophobic, i.e. it does not pick up fuel and is therefore particularly suitable for „sub-surface“ foam application. Plastics are covered evenly and wetted thoroughly. On hydrocarbon products TYPHOON 3%- AFFF can be applied as non-aspirated, aqueous solution by means of e.g. water monitors, water sprinklers, deluge systems etc.
TYPHOON 3%- AFFF is not suitable for use on polar solvents, e.g. alcohols.
TYPHOON 3%- AFFF does not contain silicones.

Environment:

None of the raw materials used in our products are banned. Our foam concentrates comply with the latest environmental regulations, such as ‘Commission Regulation (EU) No 757/2010’, amending ‘(EC) No 850/2004’ TYPHOON 3%- AFFF will also comply with the ‘significant new use rule (SNUR)’ for long-chain perfluoroalkyl carboxylate proposed by the Environmental Protection Agency, which will come into effect in due course.
Performance

TYPHOON 3%  is UL 162 listed, and type approved according to DIN/EN 1568,  Part 3: IA/IA.

Compatibility
Mixing for immediate use:
TYPHOON 3%- AFFF may be mixed at any proportion with equivalent foam concentrates if used immediately.

Mixing for long term storage:
Prior to replenishment, the quality of TYPHOON 3%- AFFF stocks should be examined by our laboratory.
Blending of TYPHOON 3%- AFFF  with similar AFFF concentrates for long-term storage is not recommended unless tested and approved by our laboratory.

Mixing with synthetic concentrates:
TYPHOON 3%- AFFF  must not be mixed with synthetic detergent, alcohol resistant, or protein foam concentrates.

Mixing with other expanded foams:
When deployed, TYPHOON 3%- AFFF  foam is compatible with all other generated foams.

Compatibility with powder
TYPHOON 3%- AFFF  is suitable for the combined use with foam compatible dry chemical powders.

Packaging
TYPHOON 3%- AFFF is available in jerrycans, plastic drums, steel drums, pallet containers (totes) and in bulk.
UL approved packaging is available for BAVARIA TYPHOON AFFF 3%, in 20 kg plastic jerrycans and 200 kg plastic drums.

Storage
TYPHOON 3%- AFFF  is stored long term in the sealed original containers or in non-corrosive plastic or stainless steel tanks. High temperatures up to 50°C do not affect the quality, neither does temporary freezing below the specified frost resistance limit. (see technical leaflet B.FL 024 “Storage of synthetic foam concentrates”). Before re-filling foam concentrate stocks arrange for a quality check-up by our laboratory.

Shelf Life
TYPHOON 3%- AFFF has a shelf life of >10 years, if stored according to our recommendations (see technical info leaflet B.FL 024 ‘Storage of Synthetic Fire Extinguishing Foam Concentrates’).
Country of Origin
 		 Germany    
Recommended induction rate 3%                         low expansion foam non-polar liquids
Foam Expansion*
(according to EN 1568)		 5 -10                      low expansion foam*
25% / 50% water drainage time* 3 - 4 minutes           4 - 8 minutes                           low expansion foam*
Colour Colorless to yellow
pH-value           @ 20°C 6.5 - 8
Density             @ 20°C 1.03 ± 0.02 g/ml
Sediment none
Surface tension/Spreading coefficient < 17.5 mN/m            > 3 mN/m (Cyclohexane)
Frost resistance - 15°C
Viscosity @ 20°C < 10           mm2/sec
@ 0  °C < 20           mm2/sec
@ -15°C < 30           mm2/sec
Enviromental acceptability BAVARIA TYPHOON AFFF 3% is physiologically harmless and readily bio degradable. Fluorine components are not fully degradable. See material safety data sheet for further information.
Special notes BAVARIA TYPHOON AFFF 3% poses no health risk, provided it is used as intended as fire extinguishing foam. Fire fighting exercise and testing may have to be agreed with local authorities. Take into account when spraying persons with foam that they will not be able to breathe whilst covered with foam. See material safety data sheet for further information.
*Foam expansion and drainage times may vary, depending on foam equipment and operating pressure.