The BAVARIA 1100-WF Fire Fighting Trailer is a water/foam rapid intervention double -axle trailer with mounted portable fire fighting pump, designed for effective fire fighting in high risk areas such as industrial and petroleum complexes, oil terminals and military locations.
| Chassis | ||||
| Manufactured of | Steel channel sections | |||
| Axles | Double axles of 2.1 ton capacity for each axle | |||
| Draw Bar | Provided with a towing attachment and towing eye | |||
| Hand Brake | Provided, attached to the draw bar | |||
| Drop-leg | Provided at rear | |||
| Down Screw Wheel | Vertically adjustable with handbrake – attached to the draw bar | |||
| Rear Lights | Equipped | |||
| Wiring | Provided with cable and plug for connection with the electric system of the towing vehicle | |||
| Mudguards and Rear Bumper | Equipped | |||
| Allowed Speed | Up-to 80 km/h on asphalt roads | |||
| Braking System | Equipped | |||
|
Extra Advantage |
Spare tire | Equipped | ||
| Rear Locker | Equipped with a rear locker for stowage of two delivery hoses and accessories | |||
| Pump Base | Provided with a sliding base-plate for easier access and unloading of the pump for independent use in narrower sites | |||
| Surface Treatment | Under carriage is treated against rust by ELBO system | |||
| Stainless Steel Water/Foam Tank | ||||
| Design and Capacity |
Consists of two compartments: 1000 l capacity water compartment, 100 l capacity foam compartment |
|||
| Filling Ratio | 90 % for both compartments | |||
| Construction | Constructed of high quality welded 3 mm stainless steel sheets | |||
| Baffles | Each compartment is provided with 3 mm stainless steel baffle | |||
| Drain Vent | Provided for each compartment | |||
| Level Indicator | Equipped for each compartment | |||
|
Water Compartment |
Manhole | Equipped | ||
|
Ventilation Opening |
Equipped | |||
| Filling Pipe | Equipped with a 2 ½ inch, instantaneous coupling BS336 inlet and a ball valve | |||
|
Foam Compartment |
Filling Opening | Equipped | ||
|
Delivery Opening |
Equipped with an opening connected to the foam proportioning system through a pick-up hose | |||
| Fixation | Fixed by bolts and rubber seats to the chassis | |||
| ZIEGLER - Portable Fire Pump | ||
| Type | Ultra Power 4 |
 |
| Country of Origin | GERMANY | |
| PUMP OUTPUT |
|
|
|
PUMP |
|
|
| PRIMING SYSTEM | Proven fully automatic TROKOMAT PLUS | |
| GAUGES AND CONTROLS |
|
|
|
ENGINE |
|
|
| LIGHTING | 1 Halogen spotlight, extendible and can be swiveled and tilted in all directions | |
|
CARRYING FRAME |
High-strength light metal frame with four ergonomically hinged and turntable handles as well as rubberized cold hand guard. | |
| DIMENSIONS |
|
|
| WEIGHT | approx. 188 ready for action | |
| Foam Proportioning System | ||
| A) In-line Inductor | ||
| Manufacturer | AWG – Germany |
 |
| Mixing ratio | 1 – 6 % | |
| Maximum Flow Rate | 400 l/min | |
| B) Low/Medium Expansion (heavy/medium foam) Air-aspirating Foam Nozzle | ||
| Design | Air aspirating stainless steel foam nozzle with an expansion rate of 15:1 on low setting and 60:1 on medium setting. It can be adjusted via a select lever, providing added flexibility depending on the hazard |
 |
| Country of Origin | Germany | |
| Type | M4/S4 | |
| Material | Stainless steel | |
| Flow Rate | 400 l/min at 5 bar | |
| Coupling Type | 2.5 inch instantaneous coupling BS 336 | |
| c) Pick up Hose | ||
| Country of Origin | Germany |
 |
| Length & Diameter | 1.5 m length, 19 mm internal diameter | |
| Storz Coupling | Provided on one side of the hose | |
| 4 - WATER/FOAM MONITOR TYPE AWG HH 1260 | |||
| Model | HH 1260 |
 |
|
| Manufacturer | AWG, Germany | ||
| Usage | Manual, easy to use on deck and can also be erected on its ground base and used separately | ||
| Operation | Controllable flow & Shoulder prop | ||
| Output | Water / Foam |
Generated foam up to 15000 l/min at 7bar (according to foam concentrate specifications) |
|
| Water | 1200 l/min. (at 8 bar) | ||
| Throw Range | Water / Foam | 40 m at 10 bar | |
| Water | 52 m at 8 bar | ||
| Rotation | 360° | ||
| Vertical Movement | +25° to 90° | ||
| Air-aspirating Foam Nozzle | Self Priming with built-in inductor | ||
| Water Jet Nozzle | 26 mm | ||
| Extra Advantage | Provided with ground base for separate use in narrow sites | ||
| Option (Multi Purpose Water Tip) | For Jet, Spray and Fog upon request at extra cost | ||
| 5 - DELIVERY HOSES | ||
| Quantity | 4 |
 |
| Type | Bavaria Standard, Type 1 | |
| Hose Diameter and Length | 64mm (2 ½ inch) x 30 m | |
| Fabrication | Flat nylon hose with internal rubber lining | |
| Optimum Working Pressure Range | 17 bar | |
| Hose Bursting Pressure | Over 48 bar | |
| Hose Coupling |
Equipped with instantaneous coupling BS 366 64 mm (2 ½ inch) |
|
| WATER JET BRANCHPIPE | ||
| Quantity | 2 |
 |
| Material | High strength aluminium alloy | |
| Operation Mode | Full jet | |
| Optimum Working Pressure Range | 5-8 bar | |
| Max. Output | 215 l/min when the ball valve is completely opened | |
| Max. Throw Range | 29 m | |
| Coupling Type | 2.5 inch instantaneouscoupling BS 336 | |
| Gasoline Engine Generator for Lighting and Rescue Operations | |
| Quantity | 1 |
| AC Output Voltage | 400 V / 230 V |
| Maximum AC Output | At least 6 KVA |
| High Intensity Working light | |
| Type | Halogen high intensity light |
| Quantity | 1 |
| Line Voltage | AC 220/240 V |
| Lamp Power | 500 W at least |
| Option at Extra Cost: Multipurpose BAVARIA TYPHOON 400 | ||||
| Model | TYPHOON-400 |
 |
||
| Country of Origin | Germany | |||
| Operation Modes | Full jet, spray and water curtain | |||
| Extra Advantage | Variable flow | |||
| Inlet Fitting | 64 mm (2 ½ inch) instantaneous coupling BS 336 | |||
| Nominal Water Inlet Working Pressure (bar) | 6 | |||
| Variable Flow Rate | Full Jet | 130 (l/min), 235 (l/min) and 400 (l/min) |
 |
|
| Spray Jet | ||||
| Effective Throw Distances @ 6 bar | Full Jet | 26 m, 42m and 40 m | ||
| Spray Jet | 11 m, 14 m and 16 m | |||
| Spray Angle | 0° to120° | |||
| Dimension (lxwxh) mm | 289x109x245 | |||
| Weight | 2.5 kg | |||
| Option at Extra Cost | Shoulder Prop. | |||
| Warranty: | |
| Period of Warranty | 1 Year |
| Coverage of the Warranty | Against material failure and production defects |
| Method of Warranty Coverage | Limited to the replacement of the defected part or product after verification that the failure is covered by the scope of the warranty |
| Warranty Exclusions | Failures due to misuse, mishandling, or inspection or repair by an unauthorized dealer or entity |
| 3 - TOHATSU Portable Pump, TYPE: VC82ASE | |||
| Model | VC82ASE |
 |
|
| Engine | Type | 2-stroke,2-cylinder, water cooled gasoline engine | |
| Authorized Output | 55 PS (Horse power) | ||
| Fuel tank Capacity | Approx. 18 liters (4.76 US gals) | ||
| Starting System | Starter motor and automatic recoil system | ||
| Ignition | Flywheel magneto | ||
| Lubrication | Auto-mixing | ||
| Battery | 12 V-16Ah/5 h | ||
| Pump | Type | Single-suction, single-stage, high pressure turbine pump | |
| Discharge Outlet Coupling | Twin 64 mm (2 ½ inch) instantaneous coupling BS 366 | ||
| Suction inlet Coupling | 102 mm (4 inch) Storz coupling | ||
| Priming | Rotary-vane vacuum pump | ||
|
Pump Performance (suction height: 3 m) |
Over 2,050 l (Over 452 gals)/min, at 0.6 Mpa Over 1,800 l (Over 476 gals)/min, at 0.8 Mpa Over 1,500 l (Over 396 gals)/min, at 1.0 MPa |
||
| General | Overall Dimensions (lxhxw) | Approx. (742 x 760 x 682) mm – ( 29.2 x 29.9 x 26.8) inch | |
| Weight | 94 kg (207 lbs.) | ||
| Max. Suction Height | Approx. 9 m ( 29.5 feet) | ||
| Option: DELIVERY HOSE - Inside and Outside Rubber lined Fire Fighting Hose, Type 3 | |||
| Origin Country | Germany |
 |
|
| Fabrication | Inside and Outside Rubber lined Fire Fighting Hose, Type 3 | ||
| Construction |
Inside: very smooth for minimum friction loss Jacket of 100 % high tenacity synthetic polyester yarn, circular woven, embedded in a rubber compound provides optimum protection of the jacket High-quality Nitrile/PVC compound is forced through the jacket Outside: longitudinal ribs for excellent abrasion resistance |
||
| Hose Coupling | Equipped with (2 ½ inch) instantaneous coupling BS 336. | ||
| Hose Diameter | Inch | 64 mm (2½ inch) |
 |
| Bursting Pressure | bar | 50 (DIN) | |
| Working Pressure (1:3 Safety) | bar | 17 (DIN) | |
| Working Pressure (1:4 Safety) | bar | 12 | |
| Weight (+/– 5 %) | g/m | 495 | |
| Wall Thickness (+/– 0,2 mm) | mm | 2,3 | |
| Theoretical Tensile Strength thin kg 1.700 | 5.1 | ||
| Approvals/Certificates |
DIN 14811:2008-01+A2:2014-08 BS 6391:2009 Type 3 M.E.D. 96/98/EC |
||
| Period of Warranty | 1 Year |
| Coverage of the Warranty | Against material failure and production defects |
| Method of Warranty Coverage | Limited to the replacement of the defected part or product after verification that the failure is covered by the scope of the warranty |
| Warranty Exclusions | Failures due to misuse, mishandling, or inspection or repair by an unauthorized dealer or entity |
